Video Transcript
0:00 ⦋ Opening Title ⦌
0:09 Before you begin make sure you have read and understand the operator’s manual, installation instructions, and all other safety instructions before setting up and using this equipment.
0:20 Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Any alterations to this equipment will void the warranty and may cause a dangerous condition.
0:35 Installation of the PopClean Elite Popper Series poppers should be performed by qualified service personnel and the fire suppression system, if equipped, must be charged and activated by an ansul-certified representative.
0:50 Read and understand the instruction manual and all other safety instructions for the unit before using this equipment.
1:00 First turn on the main power switch if the popper is not already on.
1:06 Next select your recipe by selecting Butterfly popcorn, Salt flavoring and select your popcorn load size.
1:17 Then you will need to turn on the rest of the machine.
1:20 Turn on the equipment in the following order: Oil Master; Popcorn Crisper; Filter System; Kettle Heat.
1:29 When you turn on the kettle heat it will automatically turn on the popcorn agitator.
1:35 Next, you need to prepare and measure your popcorn and Flavacol salt.
1:53 When the light next to the Load Corn Oil lights up, your kettle is ready. Load in your corn and Flavacol,
2:05 then press Dispense Oil.
2:08 Your popcorn will start popping and when the dump kettle light illuminates, it is time to dump the kettle.
2:18 If you are done cooking popcorn press the kettle heat button to turn off the kettle.
2:25 Otherwise, repeat the process when the Load Corn Oil lights up.
2:30 Take your popcorn scoop and gently move the popcorn around to separate out any unpopped kernels.
2:37 Now you are ready to scoop and serve up delicious popcorn!