Video Transcript
0:00 ⦋ Opening Title ⦌
0:10 Before you begin, make sure you have read and understand the operator’s manual,
0:14 installation instructions and all other safety instructions before setting up and using this equipment.
0:21 Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death.
0:30 Any alterations to this equipment will void the warranty and may cause a dangerous condition.
0:37 Installation of the PopClean Elite Popper Series poppers should be performed by qualified service personnel and
0:43 the fire suppression system, if equipped, must be charged and activated by an ansul-certified representative.
0:51 Read and understand the instruction manual and all other safety instructions for the unit before using this equipment.
0:59 Turn on the main power switch.
1:03 Now press Cook on your home screen
1:05 Next, select your recipe by selecting Mushroom Popcorn, Sweet flavoring and select your popcorn Load Size. Then press OK.
1:16 Your kettle then will begin preheating.
1:20 While the kettle is preheating you need to prepare and measure your popcorn and Glaze Pop.
1:26 When the machine is ready, the screen will prompt you to add corn.
1:31 Add the ingredients and close the lid.
1:39 Press OK to confirm.
1:41 Once your ingredients have been loaded, press OK to dispense oil.
1:46 When the screen says “Add Sweet Flavoring” determine if corn has begun to pop.
1:52 If it has, do not open the lid as this could be potentially dangerous.
1:57 Otherwise, add Glaze Pop and press OK.
2:02 Your popcorn will start popping and the screen will alert you when it is time to dump the kettle.
2:12 When prompted, dump the kettle and confirm by pressing OK.
2:16 Take your popcorn scoop and gently move the popcorn around to separate out any unpopped kernels.
2:25 The screen will now ask you if you need to Repeat Recipe.
2:29 Select OK to cook another batch.
2:32 If done, select Cancel.
2:34 Now you are ready to scoop and serve up delicious popcorn!